Hypothetical planning example
Chain-link system layout
Terminals, fabric rolls, top rail, and the calculator’s chain-link boundary on a long connected layout.
Updated 2026-07-21 · Methodology
Question this answers
What materials does the chain-link path estimate for a long connected run with one gate?
Assumptions
- Connected runs totaling 150 ft as in the FP-RS-06 fixture
- Chain-link fence type with default roll and rail settings
- One gate on the layout
- Terminal / end roles follow the joint model
Hypothetical planning example. These inputs and results explain and test Fence Planner. They do not describe a customer project or completed installation.
Plan view
Deterministic diagram from the same fixture the planner loads — not a photo of a finished job.
Calculator result
Derived with the shared materials engine — not hard-coded in this page.
- Total fence length: 150 ft
- Fill length (excludes gate openings): 146 ft
- Posts: 17 total (end 0, line 11, corner 0, gate 0, terminal 6, structure 0)
- Concrete bags (project rounding): 105
- Fabric rolls: 3; top-rail sections: 8
- Fill segments on the gated run: 20 ft + 26 ft
| Item | Qty | Unit |
|---|---|---|
| 4x4 fence posts4x4 x 8 ft ground-contact | 17 | ea |
| Chain-link fabric4 ft tall · 50 ft rolls | 3 | rolls |
| Top rail sections21 ft sections | 8 | ea |
| Fence ties | 146 | ea |
| Tension bars | 6 | ea |
| Brace bands | 15 | ea |
| Concrete bags12 in × 36 in holes | 105 | bags |
| Gate hinge sets | 1 | sets |
| Gate latch sets | 1 | sets |
| Nuts, bolts & washersTerminal-post hardware assortment | 1 | kit |
What this result means
- Chain-link shopping lines differ from wood panel lines — fabric and rail replace boards.
- Terminal hardware and bracing are allowances, not a full installer kit list.
- Always confirm mesh height, gauge, and fittings against the product you will buy.
What this scenario shows
- Fabric length and roll rounding
- Top-rail section count from settings
- Terminal and gate post roles distinct from wood-panel line posts
What this does not prove
- Does not design wind bracing, tension bars, or local code fittings in detail.
- Does not price live retailer SKUs.
- Hypothetical connected layout — not a surveyed boundary.
Open this exact example in the planner
Loads a hypothetical planning example. If you already have a plan in this browser, you will be asked to confirm before anything is replaced.
Open in plannerCalculations follow published methodology. Corrections welcome via contact.